RECENT SYNTHESIS OF MODIFIED ABO3 TYPE FERROELECTRIC MATERIALS
Keywords:
Ferroelectric Materials, Barium Titanate, Piezoelectric Materials, Pyroelectric MaterialsAbstract
Materials are so important for making human life more healthy, happy and easy. This is the only reasons to look into the newer materials for better future and ferroelectric materials are one of them. There are many types of ferroelectric materials considering their properties but one important way of classification is on the basis of atomic arrangement of atoms in unit cell. These classification is generalized in the form of ABO3, A2B2O3 and so many, where A and B are positions of atoms and O is number of Oxygen atoms. ABO3 type is one of the type of ferroelectric materials which are widely synthesized and characterized worldwide by many research groups. This review article of one attempt study and take review of work done by various groups.
References
I. Vijatovic M.M., Bobic J.D., stojanovic B.D.- History and challenges of Barium titanate : part II –
II. Gene H. Haertling; B.M. kilwieki - Ferroelectric ceramics: History and Technology
III. S.Stramare, V. Thangadurai and W. Weppner - Lithium Lanthanum Titanates: A review
IV. Tomonari Takeuch, et. al (2005), Preparation of composite dielectric ceramics by Spark plasma sintering method-. In Novel Materials processing by Advanced Electromagnetic Energy Sources,
V. K.Uchino (2012) Piezoelectric ceramics for transducers in Ultrasonic Transducers,
VI. Multilayer technologies for piezo-ceramic materials
VII. K. Uchino 2010- Piezoelectric materials and the new perspective –, in advanced piezoelectric materials,
VIII. Zhiyong Zhou et al, (Feb. 2023) Progress in Materials Science, Vol.132, 1010-26
IX. S.H.Han et al, (2007) Electrochemical Communication pp. 1805-1809.
X. K.M.Razeeb et al. (2015) Ionics, 21, pp. 2623-2631.
XI. X. Zhang et al, (2015) Electrochemical Acta 174pp. 41-50
XII. V.V.Deshmukh et al, (2021) Environmental Chemistry and Ecotoxicology Vol. 3, pp. 241-246
XIII. Mario L. Moreira, Elaine C. Paris et.al. Structural and optical properties of CaTiO3 perovskite – based materials obtained by microwave – assisted hydrothermal synthesis: An experimental and theoretical insight
XIV. Manjusha Passi, Bonamali Pal A review on CaTiO3 photocatalyst : Activity enhancement methods and photocatalytic applications
XV. Ujwala. Bhagwat, Jerry J.Wu et.al. Synthesis of MgTiO3 Nanoparticles for Photocatalytic Applications
XVI. Jasdeep Singh, Shalini Bahel Synthesis of single phase MgTiO3 and influence of Sn4+ Substitution on its structural, dielectric and electrical properties. -
XVII. Materials Data on NaTiO3 by Materials Project - 36 MATERIALS SCIENCE - Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). LBNL Materials Project.
XVIII. Baedi, F. Mircholi, H. Gerami Moghadam Study of electronic and optical properties of Bi0.5Na0.5TiO3, BiTiO3, NaTiO3 crystals using full potential linear argumented plane wave method.
XIX. Siyu Li, Yuhang Liu Sustainable release of LiNO3 in carbonate electrolytes for stable lithium metal anodes.
XX. 20. Dongdong Liu, Xunhui Xiong An inorganic-rich SEI induced by LiNO3 additive for a stable lithium metal anode in carbonate electrolyte.
XXI. N. Ramadass ABO3 – type Oxides- Their structure and properties – A birds eye view
XXII. C.E. Huang et al (2017) cerum.Int Effect of CaO/SnO2 additives on the microstructure and microwave dielectric properties of SrTiO3- LaAlO3.
XXIII. J.M.Kweun et.al, (2016), Appl.Surf.Sci. Bulk – surface relationship of an electronic structure for high – throughput screening of metal oxide catalysts.
XXIV. H.Liu et.al . (2020) Screening stable and metastable ABO3 perovskites using machine learning and the materials project – comput. Mater. Sci
XXV. X. Zhai et. Al (2018) Accelerated search for perovskite materials with higher curie temperature based on the machine learning methods – Compit. Mater. Sci.
XXVI. W.Li.et.al (2018) Predicting the thermodyanamics stability of perovskite oxides using machine learning models – comput. Mater. Sci.
XXVII. C.E.Calderon et.al (2015) The AFLOW standant for high – throughput materials science calculations – compt. Mater. Sci.
XXVIII. Junjiang Zhu, Hailong Li, Linyun Zhong et. al Perovskite Oxides: Preparation, Characterizations and Applications in Heterogeneous Catalysis
XXIX. O. Muller, R.Roy, The Major Ternary structural Families, springer – Verlag, New York,… ,
XXX. 30- Z.L.Wang, Z.C.Kang, Functional and smart Materials, plenum press, New York,
XXXI. chonghe Li, kitty chi kwan soh, Ping Wu Formability of ABO3 perovskites
XXXII. Haoming Wei, Chao Yang, Yangging Wu, Binggiang Cao, Michael Lorenz and Marius Grundmann Journal of Materials Chemistry – from energy harvesting to topologically insulating behavior: ABO3 type epitaxial thin films and superlattices
XXXIII. Peresi Majura Bulemo (2020) Recent advances in ABO3 perovskites: their gas – sensing performance as resistive type gas sensors –, - Journal of Korean ceramic Society 57, 24-39,
XXXIV. Huan Zhang, Na Li Keyan Li, Dong Feng Xue) Structural stability and formability of ABO3 – type perovskite compounds
XXXV. Rongzi Hong, Feng Gao, et.all. Fabrication of (BiNa)0.5TiO3-BaTiO3 textured ceramics by tape casting
XXXVI. Dibyaranjan ROUT, Kyoung-Seok MOON, et.all Study of the morphotropic phase boundary in the lead-free Na1/2Bi1/2TiO3-BaTiO3 system by Raman spectroscopy
XXXVII. Tadashi Takenaka, Yuichi Naitou et.all.) Piezoelectric Ceramics of (Bi1/2Na1/2)TiO3-PbTiO3 System
XXXVIII. T.Takenaka and K.Sakata)Dielectric, piezoelectric and pyroelectric properties of (BiNa)1/2TiO3- based ceramics
XXXIX. Dae Su Lee, Dong Hwan Lim et.all Electric field – induced deformation behavior in mixed Bi0.5Na0.5TiO3 and Bi0.5 (Na0.75K0.25)0.5TiO3-BiAlO3 .
XL. Andrea Prado – Espinosa, Javier Camargo Et. All.) Exploring new methodologies for the identification of the morphotropic phase boundary region in the (BiNa)TiO3-BaTiO3 lead free piezoceramics: Confocal Raman Microscopy-
XLI. K.Seevakan and S. Bharanidharan)New methodologies for the identification of the morphotropic phase of boundary region in the (BINA)TiO3-BaTiO3 lead free piezoceramics
XLII. Nguyen Truong – Tho, Le Dai Vuong) Effect of Sintering Temperature on the Dielectric, Ferroelectric and energy storage properties of SnO2-doped Bi0.5(Na0.8K0.2)0.5TiO3 Lead – free Ceramics
XLIII. P.Jaita, S. Manotham and N. Lertcumfu, (2018) Influence of Sintering Temperature on Structure and Electrical Properties of Modified-BNKT Lead-Free Piezoelectric Ceramics, Trans. Tech. Publ., E, 55
XLIV. S. Manotham, P. Butnoi, P.Jaita, N. Kumar, K. Chokethawai, g. Rujijanagul and D.P. Cann, (2018) Large electric Field – induced Strain and Large Improvement in Energy Density of Bismuth Sodium Potassium Titanate – based Piezoelectric Ceramics, J.Alloy.Comp., 782,270
XLV. D.K.Kushvaha, S.K. Rout and B. Tiwari, (2018)Structural, Piezoelectric and Highdensity Energy Storage Properties of Lead-free BNKT – BCZT Solid Solution, J.Alloy.Comp.,782,270
XLVI. Nguyen Truong – Tho, Le Dai Vuong Effect of Sintering Temperature on the Dielectric, Ferroelectric and energy storage properties of SnO2-doped Bi0.5(Na0.8K0.2)0.5TiO3 Lead – free Ceramics
XLVII. J.Camargo, A.Prado Espinosa et.all. Influence of the sintering process on ferroelectric properties of Bi0.5(Na0.8K0.2)0.5TiO3 lead-free piezoelectric ceramics.
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 International Educational Applied Scientific Research Journal
This work is licensed under a Creative Commons Attribution 4.0 International License.
